Die Material Handling

Die Hanlders Used For Plastic Injection Molding Machines

For those in the injection molding business, we all know that dies are very expensive. Not only are they expensive to have made, but are very expensive to have repaired.  This means the removal and installation of dies into the machine is a critical process.  If the die is dropped, it can lead to many thousands of dollars of repair, or worse yet…it gets ruined.  Die repair shops make a fortune doing repair.  The key here is using a die handler where forklifts won’t fit.

The nice thing about using a die handler is that they have push and pull capabilities.  They can push the die in and pull it out.  Basically, a table rises up to the needed height and then the die is pushed or pulled as needed.  Forklifts can be a little scary for this purpose.  They don’t have a nice table to load on to or off from, nor do they have push pull capabilities.    Of course another option is to use a die cart in combination with a forklift.  However, you may still end up with some scary moments during installation and removal.  Die carts are much less expensive and can handle massive loads.

20,000lbs. Elwell Parker 1 Used For Sale Die Handler

Finding a die handler for a cheap price can be a little tricky.  There aren’t always many available and new ones are very expensive.  Capacities typically range from 20,000lb to 150,000lb.  There are larger versions, however they aren’t very common.  You would likely see the larger capacity models in metal stamping plants and not plastic injection molding plants.

Used machines can be found here: http://goo.gl/crwpex